3-jaw self-centring electric gripper
• Plug & p1ay user friendly gripper.
• No electricity con5umption when gripper is engaged.
• No programming required.
• Gripper retention guaranteed in event of blackout.
• Self Adapting jaws part.
• Long life Brushless motor (Brushless DC).
• Built-in motor driver.
• 24 Vdc Low Voltage Power Supply.
• M8x1, 3 poles standard connection.
• Controllable by PLC as a pneumatic valve.
• Fiber-carbon gear reduction.
• 10 milion cycle maintenance-free.
• T-slot style jaws for heavy loads.
• Weight-dimensi0n5-force best trade off.
• Rotary actuator fitting compatible.
• Optional magnetic sensors.
双钳口自动对准平行i气动钳夹 (PE系列)
• 双动作(PE-25和PE-45可按要求单动作)。
• 高i性能，高可靠性。
• 不同行程的多种选择。
• 在整个行程中，夹紧力是不变的。
• 合金结构实现它的轻重量。
• FDA-H1 食品级润滑脂。
2-jaw parallel self-centering pneumatic gripper
(series PE)
• Double acting (single acting upon request for PE-25...
and PE-45...).
• High efficiency and reliability due to the lack of driving parts.
• Wide choice of stroke length options.
• The gripping force is constant on both directions along total
stroke.
• Light weight; due to its alloy construction.
• FDA-H1 food-grade grease.
编程2个串联的SB8F
要串联连接两个或多个SB8F，只需连接link通道，如图所示。有线link-OUT（盒子N1）的盒子是主盒，而有线link-IN（盒子N2）的盒子是从盒。要正确存储全部系统有线输入，只需按从盒上的AUTOSET按钮即可。在输入读取和存储期间，所连接的SB8F的全部红灯（READING）将开始闪烁。 在编程结束时，将启用全部SB8F黄灯（STORED）（和各个输出），并且也启用红灯（READING）（表示启用了link-IN通道上每个SB8F入口处连接的SB8F输出）。
